Current Position:Home > Products > Pixel LED Chip > SK seriesSK series

SK6812 3535 RGBW Pixel LED Chip

NC: NC (NC)
GND: Ground (The signal and power supply and grounding)
DIN: Data Input (control signal input data)
VDD: Power (power supply pin)
DOUT: Data Output (control signal output data)
The chip supply voltage: DC5.2V
The frequency of PWM: 1.2KHZ
Static power consumption: 1mA

  • Product Overview:
      SK6812-3535RGBW is a smart LED control circuit and light emitting circuit in one controlled LED source, which has the shape of a 3535 LED chip. Each lighting element is a pixel, and the intensities of the pixels are contained within the intelligent digital interface input. The output is driven by patented PWM technology, which effectively guarantees high consistency of the color of the pixels. The control circuit consists of a signal shaping amplification circuit, a built-in constant current circuit,and a high precision RC oscillator.
      The data protocol being used is unipolar RZ communication mode. The 24-bit data is transmitted from the controller to DIN of the first element, and if it is accepted it is extracted pixel to pixel. After an internal data latch, the remaining data is passed through the internal amplification circuit and sent out on the DO port to the remaining pixels. The pixel is reset after the end of DIN. Using automatic shaping forwarding technology makes the number of cascaded pixels without signal transmission only limited by signal transmission speed.
      The LED has a low driving voltage (which allows for environmental protection and energy saving), high brightness, scattering angle, good consistency, low power, and long life. The control circuit is integrated in the LED above.

    Description:
    ● Top SMD internal integrated high quality external control line serial cascade constant current IC;
    ● control circuit and the RGB chip in SMD 3535 components, to form a complete control of pixel, color mixing uniformity and consistency;
    ●built-in data shaping circuit, a pixel signal is received after wave shaping and output waveform distortion will not guarantee a line;
    ●The built-in power on reset and reset circuit, the power does not work;
    ●gray level adjusting circuit (256 level gray scale adjustable);
    ● red drive special treatment, color balance;
    ● line data transmission;
    ● plastic forward strengthening technology, the transmission distance between two points over 10M;
    ●Using a typical data transmission frequency of 800 Kbps, when the refresh rate of 30 frames per sec

    Mechanical Dimensions:

     

    PIN configuration:

     

    Recommended dimensions for PCB:

     

  • SK6812 3535 RGBW LED chip main application Field:
    ● Full color LED string light, LED full color module, LED super hard and soft lights, LED guardrail tube,
    LED appearance / scene lighting
    ● LED point light, LED pixel screen, LED shaped screen, a variety of electronic products, electrical
    equipment etc..
  • SK6812 3535 RGB Pixel LED Chip SK9826 16bit 5050 RGB Pixel LED Chip SK9826 16bit 2020 RGB Pixel LED Chip SK6812 RGBW 90RA Pixel LED chip EC20 SK6813 2020 Pixel LED chip EC20 SK6812 2020 Pixel LED chip EC15 SK6812 1515 EC15 Pixel LED chip New SK9822 RGB Pixel LED Chip 5050 SK9822 RGB Pixel LED Chip 5050 SK6812W White Pixel LED 5050 SK6812WWA Pixel LED Chip 5050 SK6812RGBW Pixel LED Chip 5050
  • Company Name:
    *Your Name:
    *Phone:
    MSN&Skype:
    *E-mail:
    Website:
    Please select form the list below:
    Contacted us before? YES NO
    *Message:
    Verification Code:
  • Tel

  • +86-755-29405686