Current Position:Home > Products > Pixel LED Chip > NS/APA SeiresNS/APA Seires

NS8808 DC12V Pixel LED Chip replace WS2815

NS8808 DC12V Pixel LED Chip, it is same protocol with ws2815, the only one pixel LEDs can replace ws2815 directly at this moment, and it is more stable than ws2815 after long time tested.
DC12V Dual-signal wires version, signal break-point continuous transmission. Any pixel's failure won't affect signal transfer and total emitting effect.

  • 5050 NS8808 RGB LED Chip
    IC Type:NS8808
    Emitting Color :Digital RGB
    Working Voltage: 12VDC 
    Gray Level:256 
    Max Power:0.2W 
    Led Type: 5050 SMD LED

    1.12v operating supply voltage with 7805 module inside
    2·Default 17.5mA constant current output, the minimum is 11mA
    3·Use e-RZ code, serial data frequency 800kHz
    4·8bits data transfer, 12bits build-in GAMMA correction of PWM display
    5·Built-in PWM technology, supports 8kHz PWM refresh rate
    6·With resumable data transfer function, single chip damage does not infect data transmission
    7·Built-in display pattern for the applications without a controller
    8·Built-in automatic test mode, power-on and power-off protection
    9·ESD: 2kV
    10·working environment is from -40 ° C to + 85 ° C

      The NS8808 is a 3-channel constant current LED drive with resumable data transfers and internal display patterns.  There are three open-drain constant current outputs, with a build-in PWM of grayscale. The range of input power is from +9V to +15V, and voltage-endurance of LED port is +12V. There is a built-in 12bits GAMMA correction module. PWM maximum refresh frequency is 8Khz, the GE8808B use the e-RZ (extended return to zero code)as the signal transmission mode,which can control the output current channel by channel and cascade infinitely,it provides two-signal data input as redundant control, which ensures the transmission of the signal if any single chip damages.In the displays the built-in display patterns that is suitable for those applications without a controller. There is the built-in power-on and power-off protection in the drive,which can enhance the service life of the chip. It alsohas the automatic test function while power on, working environment is from -40 ° C to + 85 ° C.

  • NS107S White Pixel LED Chip 5050 NS108 5050 RGB Pixel LED Chip NS108 16bit 2020 RGB Pixel LED Chip APA107 3535 Pixel LED Chip NS107S 3535 Pixel LED Chip NS108 16bit RGB Pixel LED Chip 5050 NS107S 2020 Pixel LED Chip APA107 2020 Pixel LED Chip NS107S-SA RGB Pixel LED Chip 5050 NS107S RGB Pixel LED Chip 5050 APA107 White Pixel LED Chip 5050 APA107 RGB Pixel LED Chip 5050
  • Company Name:
    *Your Name:
    Please select form the list below:
    Contacted us before? YES NO
    Verification Code:
  • Tel

  • +86-755-29405686